Six common mechanical faults


There are six kinds of common faults in drilling machinery:
(1) Damaged faults: such as fracture, cracking, pitting, ablation, deformation, strain, cracking, indentation, etc.;
(2) Degenerative faults, such as aging, deterioration, peeling, abnormal wear, etc.;
(3) Loose type failure: such as loosening, shedding, etc.;
(4) Maladjusted faults: such as excessive or low pressure, misalignment, large or small gaps, interference, etc.;
(5) Blockage and leakage failure: such as blockage, leakage, leakage, oil seepage, etc.;
(6) Performance deterioration or functional failure mode: such as functional failure, performance deterioration, overheating, etc..